Digitale

Multiprotocol Booster 3Amp with short circuit protection.

Power supply via 17V alternating current transformer

6021-Infrared- & LocoNet-Adapter

* Enjoy the big amount of capabilities of

LocoNet devices

* Thanks to the adapter all devices with

LocoNet-connector can operate with the

Control-Unit.

* Control your locos wireless and switch

turnouts without the use of a keyboard:

Thanks to the integrated infrared receiver,

the IRIS remote can be directly used.

The LocoNet adapter for the 6021 is

connected to the left side of the 6021

Control Unit (or any device connected to

that side, e.g., a Méarklin Keyboard). Power

is provided by the Control Unit.

8 ohm speaker 15 x 25 x 12 mm 0.5 Watt with sound box

8ohm 20 x 20 x 12 mm 1Watt speaker with sound box

Additional keyboard for all commands related to the layout of the layout.

Routing is carried out, switches and signals are controlled, etc. etc.

Power and data, via Loconet cable from Intellibox II control unit

he Acceleration-Brake module ABBS

makes it possible to have realistic

stopping at signals. At a stop signal the

train will brake to slow down and then

stop at the signal. When the “clear” signal

is given, the train slowly accelerates back

to its set speed. The acceleration and

breaking distances can be set with the

potentiometer in a large range.

With a “clear” signal the train passes the

section without stopping. 

Braking module with partial speed approach for precise stopping on signal

The stationary Decoder, for installing in working models (e.g. model crane), has two outputs

for motors and four additional switch outputs.

The working model decoder is suitable working models in Märklin or DCC Digital systems. It

can be operated with either 14 or 28 (DCC) speed steps.

Each motor output can be switched on and off using any programmable special function. The

motor speed can be controlled by the speed control.

All function outputs can be programmed to blink und/or be dimmed. A1 and A2 can also have

timed ‘on’ period.

FRU 55 500

Electronic Reversing Switch

For DC Locomotives

For converting DC locomotives to AC operation

Electronic Reversing Switch

For DC Locomotives

For converting DC locomotives to AC operation

Description

On the market since 1988, our reversing switch is still the smallest available reversing switch.

Because of its small dimensions it fits into almost every vehicle without any problems.

The component guarantees safe jerk free switching without the bright flashing of the

locomotive’s lighting. The drive chain in the locomotive remains unchanged. The locomotive

light can be connected to depend on the driving direction.

The FRED-CS is designed as an additional acceleration control that can be

connected to a Marklin Central Station with software version 2.0.4 or lower.

Operation with an ESU ECoS is also possible.

Operation with a Mobile Station, however, is not possible.

The device cannot be used alone; it must always be used as a second

acceleration control on one of the above-mentioned devices, since it does not have its

own power section.

This original gantry crane was built in large numbers and can still be found on many loading platforms today.

This finished model is made of plastic and has very fine details. Silent miniature motors

with metal gears raise and lower the crane hook and move the trolley. The crane has two switchable

outputs, for example for lighting, a lifting magnet or a gripper.

The model is equipped with a digital decoder, so all functions can be controlled with any

DCC or Märklin-Motorola digital control unit. Analogue operation is also possible via push-button connections.

Control unit controlled via USB cable from PC

16V AC power supply (transformer not included)

6 different screens for train control, CV programming, itineraries, switches, signals

It can also be controlled from the IB-Control keyboard via Loconet cable

Individual locomotive control system with infrared receiver

Computer-free system automation

The mobile station Adapter 63 810 connects a Märklin mobile station with the LocoNetconnector

of a Digital Centre (Intellibox, DAISY, 6021-Infrared & LocoNet Adapter, TwinCenter).

With the Adapter the mobile station can be used as an additional hand controller for controlling

locomotives on any LocoNet control centre. With the Adapter the mobile station functionality is

expanded. The mobile station can not control solenoids when connected directly to the track.

This is however possible with the Adapter connected to the LocoNet control centre,