Digitale

8 ohm speaker 15 x 25 x 12 mm 0.5 Watt with sound box

8ohm 20 x 20 x 12 mm 1Watt speaker with sound box

he Acceleration-Brake module ABBS

makes it possible to have realistic

stopping at signals. At a stop signal the

train will brake to slow down and then

stop at the signal. When the “clear” signal

is given, the train slowly accelerates back

to its set speed. The acceleration and

breaking distances can be set with the

potentiometer in a large range.

With a “clear” signal the train passes the

section without stopping. 

Braking module with partial speed approach for precise stopping on signal

The stationary Decoder, for installing in working models (e.g. model crane), has two outputs

for motors and four additional switch outputs.

The working model decoder is suitable working models in Märklin or DCC Digital systems. It

can be operated with either 14 or 28 (DCC) speed steps.

Each motor output can be switched on and off using any programmable special function. The

motor speed can be controlled by the speed control.

All function outputs can be programmed to blink und/or be dimmed. A1 and A2 can also have

timed ‘on’ period.

FRU 55 500

Electronic Reversing Switch

For DC Locomotives

For converting DC locomotives to AC operation

Electronic Reversing Switch

For DC Locomotives

For converting DC locomotives to AC operation

Description

On the market since 1988, our reversing switch is still the smallest available reversing switch.

Because of its small dimensions it fits into almost every vehicle without any problems.

The component guarantees safe jerk free switching without the bright flashing of the

locomotive’s lighting. The drive chain in the locomotive remains unchanged. The locomotive

light can be connected to depend on the driving direction.

Individual locomotive control system with infrared receiver

Computer-free system automation

The mobile station Adapter 63 810 connects a Märklin mobile station with the LocoNetconnector

of a Digital Centre (Intellibox, DAISY, 6021-Infrared & LocoNet Adapter, TwinCenter).

With the Adapter the mobile station can be used as an additional hand controller for controlling

locomotives on any LocoNet control centre. With the Adapter the mobile station functionality is

expanded. The mobile station can not control solenoids when connected directly to the track.

This is however possible with the Adapter connected to the LocoNet control centre, 

Faithful to the original working lifting magnet BvM L34-170 from the company J.

Braun GmbH

Usable with crane models from all manufacturers.

With connecting plug for our gantry crane 80 000. 

LISSY infrared transmitter

LISSY Receiver 

LISSY receiver 68 610 uses a single sensor only. For this reason only those LISSY functions

using a single sensor can be implemented. These are the switching operation, reading of the

locomotive data and the transfer of this data to the LocoNet. All automatic functions like

shuttle operation, holding point, block-section or station control are not possible with this

receiver.

Uhlenbrock Solenoid and Switch decoder can operate in Motorola digital layouts (from Uhlenbrock and

Marklin) and in DCC digital layouts (from Uhlenbrock, Lenz, Arnold, LGB and Roco).

For the first time, the programming of the address in a Motorola format, is as simple as it has up to now

only been in DCC systems. The building block remembers the ‘listening’ format for key pair for which it

has been setup. The cumbersome encoding of addresses is now superfluous.

The Uhlenbrock Magnetic solenoid and switch decoder can use all addresses that the various controllers

can assign. Intellibox und IB-Switch can use addresses 1 to 320 in Motorola format and addresses 1 to

2040 in DCC format.

Mini transmitter module for connection to decoder with Lissy output

• Suitable for DC and bell-shaped armature motors

• Up to 3 A continuous, 5 A peak

• Silent motor operation thanks to the 18.75 kHz control frequency

• 14, 27, 28, and 128 speed levels, depending on the data format

• Short addresses (1-127) and long addresses (for 128-9999)

• Configurable minimum, maximum, and average speed

• Adjustable minimum, maximum, and average speed

• Speed level tables for 14- and 28-speed mode

• Start/brake inertia switchable via F4

• Headlights switchable via F0, dimmable

• 8 outputs for special functions switchable, dimmable, or timed via F1 to F8